Version: 3.10

limit-req

Description#

The limit-req Plugin limits the number of requests to your service using the leaky bucket algorithm.

Attributes#

Name	Type	Required	Default	Valid values	Description
rate	integer	True		rate > 0	Threshold for number of requests per second. Requests exceeding this rate (and below `burst`) will be delayed to match this rate.
burst	integer	True		burst >= 0	Number of additional requests allowed to be delayed per second. If the number of requests exceeds this hard limit, they will get rejected immediately.
key_type	string	False	"var"	["var", "var_combination"]	Type of user specified key to use.
key	string	True		["remote_addr", "server_addr", "http_x_real_ip", "http_x_forwarded_for", "consumer_name"]	User specified key to base the request limiting on. If the `key_type` attribute is set to `var`, the key will be treated as a name of variable, like `remote_addr` or `consumer_name`. If the `key_type` is set to `var_combination`, the key will be a combination of variables, like `$remote_addr $consumer_name`. If the value of the key is empty, `remote_addr` will be set as the default key.
rejected_code	integer	False	503	[200,...,599]	HTTP status code returned when the requests exceeding the threshold are rejected.
rejected_msg	string	False		non-empty	Body of the response returned when the requests exceeding the threshold are rejected.
nodelay	boolean	False	false		If set to `true`, requests within the burst threshold would not be delayed.
allow_degradation	boolean	False	false		When set to `true` enables Plugin degradation when the Plugin is temporarily unavailable and allows requests to continue.
policy	string	False	"local"	["local", "redis", "redis-cluster"]	Rate-limiting policies to use for retrieving and increment the limit count. When set to `local` the counters will be locally stored in memory on the node. When set to `redis` counters are stored on a Redis server and will be shared across the nodes. It is done usually for global speed limiting, and setting to `redis-cluster` uses a Redis cluster instead of a single instance.
redis_host	string	required when `policy` is `redis`			Address of the Redis server. Used when the `policy` attribute is set to `redis`.
redis_port	integer	False	6379	[1,...]	Port of the Redis server. Used when the `policy` attribute is set to `redis`.
redis_username	string	False			Username for Redis authentication if Redis ACL is used (for Redis version >= 6.0). If you use the legacy authentication method `requirepass` to configure Redis password, configure only the `redis_password`. Used when the `policy` is set to `redis`.
redis_password	string	False			Password for Redis authentication. Used when the `policy` is set to `redis` or `redis-cluster`.
redis_ssl	boolean	False	false		If set to `true`, then uses SSL to connect to redis instance. Used when the `policy` attribute is set to `redis`.
redis_ssl_verify	boolean	False	false		If set to `true`, then verifies the validity of the server SSL certificate. Used when the `policy` attribute is set to `redis`. See tcpsock:sslhandshake.
redis_database	integer	False	0	redis_database >= 0	Selected database of the Redis server (for single instance operation or when using Redis cloud with a single entrypoint). Used when the `policy` attribute is set to `redis`.
redis_timeout	integer	False	1000	[1,...]	Timeout in milliseconds for any command submitted to the Redis server. Used when the `policy` attribute is set to `redis` or `redis-cluster`.
redis_cluster_nodes	array	required when `policy` is `redis-cluster`			Addresses of Redis cluster nodes. Used when the `policy` attribute is set to `redis-cluster`.
redis_cluster_name	string	required when `policy` is `redis-cluster`			Name of the Redis cluster service nodes. Used when the `policy` attribute is set to `redis-cluster`.
redis_cluster_ssl	boolean	False	false		If set to `true`, then uses SSL to connect to redis-cluster. Used when the `policy` attribute is set to `redis-cluster`.
redis_cluster_ssl_verify	boolean	False	false		If set to `true`, then verifies the validity of the server SSL certificate. Used when the `policy` attribute is set to `redis-cluster`.

Enable Plugin#

You can enable the Plugin on a Route as shown below:

note

You can fetch the admin_key from config.yaml and save to an environment variable with the following command:

admin_key=$(yq '.deployment.admin.admin_key[0].key' conf/config.yaml | sed 's/"//g')

curl http://127.0.0.1:9180/apisix/admin/routes/1 -H "X-API-KEY: $admin_key" -X PUT -d '
{
    "methods": ["GET"],
    "uri": "/index.html",
    "plugins": {
        "limit-req": {
            "rate": 1,
            "burst": 2,
            "rejected_code": 503,
            "key_type": "var",
            "key": "remote_addr"
        }
    },
    "upstream": {
        "type": "roundrobin",
        "nodes": {
            "127.0.0.1:9001": 1
        }
    }
}'

You can also configure the key_type to var_combination as shown:

{
    "methods": ["GET"],
    "uri": "/index.html",
    "plugins": {
        "limit-req": {
            "rate": 1,
            "burst": 2,
            "rejected_code": 503,
            "key_type": "var_combination",
            "key": "$consumer_name $remote_addr"
        }
    },
    "upstream": {
        "type": "roundrobin",
        "nodes": {
            "127.0.0.1:9001": 1
        }
    }
}

You can also configure the Plugin on specific consumers to limit their requests.

First, you can create a Consumer and enable the limit-req Plugin on it:

curl http://127.0.0.1:9180/apisix/admin/consumers -H "X-API-KEY: $admin_key" -X PUT -d '
{
    "username": "consumer_jack",
    "plugins": {
        "key-auth": {
            "key": "auth-jack"
        },
        "limit-req": {
            "rate": 1,
            "burst": 3,
            "rejected_code": 403,
            "key": "consumer_name"
        }
    }
}'

In this example, the key-auth Plugin is used to authenticate the Consumer.

Next, create a Route and enable the key-auth Plugin:

curl http://127.0.0.1:9180/apisix/admin/routes/1 -H "X-API-KEY: $admin_key" -X PUT -d '
{
    "methods": ["GET"],
    "uri": "/index.html",
    "plugins": {
        "key-auth": {
            "key": "auth-jack"
        }
    },
    "upstream": {
        "type": "roundrobin",
        "nodes": {
            "127.0.0.1:1980": 1
        }
    }
}'

Example usage#

Once you have configured the Plugin as shown above, you can test it out. The above configuration limits to 1 request per second. If the number of requests is greater than 1 but less than 3, a delay will be added. And if the number of requests per second exceeds 3, it will be rejected.

Now if you send a request:

curl -i http://127.0.0.1:9080/index.html

For authenticated requests:

curl -i http://127.0.0.1:9080/index.html -H 'apikey: auth-jack'

If you exceed the limit, you will receive a response with a 503 code:

HTTP/1.1 503 Service Temporarily Unavailable
Content-Type: text/html
Content-Length: 194
Connection: keep-alive
Server: APISIX web server

<html>
<head><title>503 Service Temporarily Unavailable</title></head>
<body>
<center><h1>503 Service Temporarily Unavailable</h1></center>
<hr><center>openresty</center>
</body>
</html>

You can set a custom rejected message by configuring the rejected_msg attribute. You will then receive a response like:

HTTP/1.1 503 Service Temporarily Unavailable
Content-Type: text/html
Content-Length: 194
Connection: keep-alive
Server: APISIX web server

{"error_msg":"Requests are too frequent, please try again later."}

Delete Plugin#

To remove the limit-req Plugin, you can delete the corresponding JSON configuration from the Plugin configuration. APISIX will automatically reload and you do not have to restart for this to take effect.

curl http://127.0.0.1:9180/apisix/admin/routes/1 -H "X-API-KEY: $admin_key" -X PUT -d '
{
    "methods": ["GET"],
    "uri": "/index.html",
    "id": 1,
    "plugins": {
    },
    "upstream": {
        "type": "roundrobin",
        "nodes": {
            "127.0.0.1:1980": 1
        }
    }
}'

Similarly for removing the Plugin from a Consumer:

curl http://127.0.0.1:9180/apisix/admin/consumers -H "X-API-KEY: $admin_key" -X PUT -d '
{
    "username": "consumer_jack",
    "plugins": {
        "key-auth": {
            "key": "auth-jack"
        }
    }
}'