Version: 1.6.1

Annotations

Annotations can be used with the native Kubernetes ingress resource to access advanced features in Apache APISIX. Alternatively, you can use APISIX's CRDs for a better experience.

This document describes all the available annotations and their uses.

note

Key-value pairs in annotations are strings. So boolean values should be reprsented as "true" and "false".

CORS#

You can enable CORS by adding the annotation as shown below:

metadata:
  annotations:
    k8s.apisix.apache.org/enable-cors: "true"

You can also customize the behaviour with some additional annotations as shown below.

Allow origins#

This annotation configures which origins are allowed. Multiple origins can be added in a comma separated form.

k8s.apisix.apache.org/cors-allow-origin: "https://foo.com,http://bar.com:8080"

The default value is "*" which means all origins are allowed.

Allow headers#

This annotation configures which headers are allowed. Multiple headers can be added in a comma separated form.

k8s.apisix.apache.org/cors-allow-headers: "Host: https://bar.com:8080"

The default value is "*" which means all headers are allowed.

Allow methods#

This annotation configures which HTTP methods are allowed. Multiple methods can be added in a comma separated form.

k8s.apisix.apache.org/cors-allow-methods: "GET,POST"

The default value is "*" which means all methods are allowed.

Allowlist source range#

This annotation can be used to specify which client IP addresses or nets are allowed. Multiple IP addresses can also be specified by separating them with commas.

k8s.apisix.apache.org/allowlist-source-range: "10.0.5.0/16,127.0.0.1,192.168.3.98"

The default value is empty which means all IP addresses are allowed.

Blocklist source range#

This annotation can be used to specify which client IP addresses or nets are blocked. Multiple IP addresses can also be specified by separating them with commas.

k8s.apisix.apache.org/blocklist-source-range: "127.0.0.1,172.17.0.0/16"

The default value is empty which means no IP addresses are blocked.

Customized http methods#

http-allow-methods and http-block-methods are mutually exclusive. If they're both set, only http-allow-methods works

Allow http methods#

This annotation can be used to specify which http method are allowed. Multiple methods can also be specified by separating them with commas.

k8s.apisix.apache.org/http-allow-methods: "GET,POST"

The default value is empty which means all methods are allowed.

Block http methods#

This annotation can be used to specify which http method are blocked. Multiple methods can also be specified by separating them with commas.

k8s.apisix.apache.org/http-block-method: "PUT,DELETE"

The default value is empty which means no methods are blocked.

Rewrite target#

These annotations are used to rewrite requests.

The annotation k8s.apisix.apache.org/rewrite-target specifies where to forward the request.

If you want to use regex and match groups, use the annotations k8s.apisix.apache.org/rewrite-target-regex and k8s.apisix.apache.org/rewrite-target-regex-template. The former should contain the matching rule and the latter should contain the rewrite rule. Both these annotations must be used together.

The example below configures the Ingress to forward all requests with /app prefix to the backend removing the /app/ part. So, a request to /app/ip will be forwarded to /ip.

apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
  annotations:
    k8s.apisix.apache.org/rewrite-target-regex: "/app/(.*)"
    k8s.apisix.apache.org/rewrite-target-regex-template: "/$1"
  name: ingress-v1
spec:
  ingressClassName: apisix
  rules:
    - host: httpbin.org
      http:
        paths:
          - path: /app
            pathType: Prefix
            backend:
              service:
                name: httpbin
                port:
                  number: 80

HTTP to HTTPS#

This annotation is used to redirect HTTP requests to HTTPS with a 301 status code and with the same URI as the original request.

The example below will redirect HTTP requests with a 301 status code with a response header Location:https://httpbin.org/sample.

apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
  annotations:
    k8s.apisix.apache.org/http-to-https: "true"
  name: ingress-v1
spec:
  ingressClassName: apisix
  rules:
    - host: httpbin.org
      http:
        paths:
          - path: /sample
            pathType: Exact
            backend:
              service:
                name: httpbin
                port:
                  number: 80

Regex paths#

This annotation is can be used to enable regular expressions in path matching.

With this annotation set to "true" and PathType set to ImplementationSpecific, the path matching will use regex. The example below configures Ingress to route requests to path /api/*/action1 to service1 and /api/*/action2 to service2.

apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
  annotations:
    k8s.apisix.apache.org/use-regex: "true"
  name: ingress-v1
spec:
  ingressClassName: apisix
  rules:
    - host: httpbin.org
      http:
        paths:
          - path: /api/.*/action1
            pathType: ImplementationSpecific
            backend:
              service:
                name: service1
                port:
                  number: 80
          - path: /api/.*/action2
            pathType: ImplementationSpecific
            backend:
              service:
                name: service2
                port:
                  number: 80

Enable websocket#

This annotation is use to enable websocket connections.

In the example below, the annotation will enable websocket connections on the route /api/*:

apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
  annotations:
    k8s.apisix.apache.org/enable-websocket: "true"
  name: ingress-v1
spec:
  ingressClassName: apisix
  rules:
    - host: httpbin.org
      http:
        paths:
          - path: /api/*
            pathType: ImplementationSpecific
            backend:
              service:
                name: service1
                port:
                  number: 80

Response Rewrite#

You can enable Response Rewrite by adding the annotation as shown below:

metadata:
  annotations:
    k8s.apisix.apache.org/enable-response-rewrite: "true"

You can customize the behaviour with some additional annotations as shown below.

New HTTP status code#

This annotation configures the new HTTP status code in the response.

k8s.apisix.apache.org/response-rewrite-status-code: "404"

If unset, falls back to the original status code.

New body#

This annotation configures the new body in the response.

k8s.apisix.apache.org/response-rewrite-body: "bar-body"

Body Base64#

When set, the body of the request will be decoded before writing to the client.

k8s.apisix.apache.org/response-rewrite-body-base64: "true"

The default value is "false".

Using ApisixPluginConfig resource#

This annotation is used to enable a defined ApisixPluginConfig resource on a particular route.

The value of the annotation should be the name of the created ApisixPluginConfig resource.

The example below shows how this is configured. The created route /api/* will have the echo and cors Plugins enabled as has the resource configured through annotations:

apiVersion: apisix.apache.org/v2
kind: ApisixPluginConfig
metadata:
  name: echo-and-cors-apc
spec:
  plugins:
    - name: echo
      enable: true
      config:
        before_body: "This is the preface"
        after_body: "This is the epilogue"
        headers:
          X-Foo: v1
          X-Foo2: v2
    - name: cors
      enable: true
---
apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
  annotations:
    k8s.apisix.apache.org/plugin-config-name: "echo-and-cors-apc"
  name: ingress-v1
spec:
  ingressClassName: apisix
  rules:
    - host: httpbin.org
      http:
        paths:
          - path: /api/*
            pathType: ImplementationSpecific
            backend:
              service:
                name: service1
                port:
                  number: 80

Upstream scheme#

The scheme used when communicating with the Upstream. this value can be one of 'http', 'https', 'grpc', 'grpcs'. Defaults to 'http'.

apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
  annotations:
    kubernetes.io/ingress.class: apisix
    k8s.apisix.apache.org/upstream-scheme: grpcs
  name: ingress-v1
spec:
  rules:
  - host: e2e.apisix.local
    http:
      paths:
      - path: /helloworld.Greeter/SayHello
        pathType: ImplementationSpecific
        backend:
          service:
            name: test-backend-service-e2e-test
            port:
              number: 50053

Cross-namespace references#

This annotation can be used to route to services in a different namespace.

In the example configuration below, the Ingress resource in the default namespace references the httpbin service in the test namespace:

apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
  annotations:
    k8s.apisix.apache.org/svc-namespace: test
  name: ingress-v1-svc
  namespace: default
spec:
  ingressClassName: apisix
  rules:
    - host: httpbin.org
      http:
        paths:
          - path: /ip
            pathType: Exact
            backend:
              service:
                name: httpbin
                port:
                  number: 80